Fiber Base Coat Milano 12ml

• Characteristics

  • It does not "run" and does not "collect", making the application very easy.
  • Perfect result in one layer.
  • Duration exceeding 4 weeks.
  • It cures both UV lamp and LED.
  • Easy removal in 5-7 minutes with pure acetone, without causing damage to the natural nail.
  • Same application, better result.

• Application Instructions

  1. First do the procedure for a clean nail and then apply the Primer optionally, without the use of a UV lamp or LED.
  2. Apply a thin layer of Fiber Base Coat Milano and cure in a 36 Watt UV lamp for 2 minutes or in an LED lamp for 30-60 seconds.
  3. Continue with a thin layer of the color of your choice and polymerize again for 2 minutes in a UV lamp or 30-60 seconds in a led lamp.
  4. Repeat a thin layer of the paint again and polymerize again at the respective times depending on the lamp. If you want a more intense color, repeat for the third time.
  5. Finish with Top Coat No Wipe without wiping, you do not need to remove the sticky substance. If using the conventional top coat, remove the sticky substance with an alcoholic lotion.

• Subtraction

  Step 1 : Using a file, lightly remove the Top coat from the surface of the nail

  Step 2 : Soak a thin piece of cotton with Nail Polish Remover.

  Step 3 : Place it on the nail and wrap it with foil.

  Step 4 : Wait for 2 to 5 minutes.

  Step 5 : Remove the foil with a cotton swab and gently remove the varnish with a cutter.