Creamy wax for hair removal of any hardness and length (from 3 mm). Very elastic wax, gently distributed on the skin in an even layer, excellent for removing short, rough hairs. It contains rose oil, which has a healing effect and has a light floral aroma.

Flex candles are a superior combination of synthetic and natural resins with the addition of innovative ingredients.

Flex waxes have special plasticity, they are applied to large surfaces in a very thin and uniform layer using a spatula (or roller).

When Flex waxes cool, they form a thin film that captures all the hair (especially when working with the layering method) and provides strong adhesion to the bandage strip. 100% hair removal the first time without breakage.

It doesn't leave any stickiness on the skin.

• Melting point: +38 + 40°C
• Area of application: hands, feet
• Application method: roller, spatula
• Removal method: bandage tape
• Release form: cartridge 100 ml, jar 400 / 800 ml

• How to use ItalWax hot wax 1

  Instructions for use

  Cartridge method
  

  1. Heat the candle in a candle holder at +40 °C.
  2. Treat the skin at the epilation site with lotion or foam before epilation.
  3. Without removing the cartridge from the heater, roll the heated wax cartridge over the epilation strip, making sure the wax is hot enough.
  4. Apply wax to the treated area of skin in the direction of hair growth.
  5. Apply the depilatory tape , with the end of the tape on an area without wax.
  6. Press the strip firmly against the skin.
  7. Grasp the free end of the strip and remove the strip with a sharp movement in the direction against hair growth, parallel to the skin.
  8. Repeat the process in the next section. You can apply wax to the same area no more than 2 times.
  9. At the end of the process, be sure to remove any sticky and waxy residue using post-hair removal lotion .

• How to use ItalWax 2 hot wax

  Instructions for use

  Spatula method
  

  1. Heat the wax in a wick to t + 42°C.
  2. Treat the skin at the epilation site with lotion or foam before epilation.
  3. Apply some talc on the surface of the skin.
  4. Stirring the wax periodically, pay attention to the consistency; the ready-to-use wax should not be wet.
  5. Take the required amount of wax with a spatula .
  6. Remove excess wax from the spatula. Be careful, wax may drip from the spatula!
  7. To avoid getting stained with wax, keep a wax warmer near the sofa. To bring the wax on the spatula to the area of hair removal and not to stain the surfaces, keep the depilatory tape under the spatula.
  8. Apply wax to the treated area of skin in the direction of hair growth.
  9. Using the tip of a spatula, quickly spread the wax over the waxing area, covering a large area with a thin layer.
  10. For wax removal rules, see cartridge method: points 5–9.