Rubber Fiber Base Silky Shimmer MollyLac

Hard and durable thanks to the fibers and at the same time extremely flexible thanks to the rubber formula!

RUBBER FIBER MollyLac is a product for special tasks. Approach it when you need extreme control over your manicure and also when you want to be sure that you need a product that will never disappoint you! You can be sure that it will work perfectly with your natural nail and will prevent cracks and breakage of the varnish. Due to its dense consistency, the base does not run on your skin. We can easily even out the inhomogeneity in the nail plate, which we will achieve thanks to its properties since it is self-leveling.

• Characteristics

  • It does not "run" and does not "collect", making the application very easy.
  • Perfect result in one layer.
  • Duration exceeding 4 weeks.
  • It cures both UV lamp and LED.
  • Easy removal in 5-7 minutes with pure acetone, without causing damage to the natural nail.
  • Same application, better result.

• Application Instructions

  1. First do the procedure for a clean nail and then optionally apply Primer ACID or Primer NON-ACID , without the use of a UV lamp or LED.
  2. Apply a thin layer of Fiber Base MollyLac and cure in a 36 Watt UV lamp for 2 minutes or in an LED lamp for 30-60 seconds.
  3. Continue with a thin layer of the color of your choice and polymerize again for 2 minutes in a UV lamp or 30-60 seconds in a led lamp.
  4. Repeat a thin layer of the paint again and polymerize again at the respective times depending on the lamp. If you want a more intense color, repeat for the third time.
  5. Finish with Doctor Top MollyLac without wiping, you do not need to remove the sticky substance. If using the conventional top coat, remove the sticky substance with an alcoholic lotion.

• Subtraction

  Step 1 : Remove the Top coat lightly from the nail surface with a file

  Step 2 : Soak a thin piece of cotton with Nail Polish .

  Step 3 : Place it on the nail and wrap it with foil.

  Step 4 : Wait for 2 to 5 minutes.

  Step 5 : Remove the foil with a cotton swab and gently remove the varnish with a cutter.