Base for semi-permanent
Semilac Therapeutic Base

• Semilac Care Base

  Application Instructions

  1. First do the procedure for a clean nail and then apply either Primer Acid or Primer Non Acid , without the use of a UV lamp or LED.
  2. Apply a thin layer of Care Base and cure in a 36 Watt UV lamp for 2 minutes or in an LED lamp for 30-60 seconds.
  3. Continue with a thin layer of the color of your choice and polymerize again for 2 minutes in a UV lamp or 30-60 seconds in a led lamp.
  4. Repeat a thin layer of the paint again and polymerize again at the respective times depending on the lamp. If you want a more intense color, repeat for the third time.
  5. Finish with the Semilac Top No Wipe without wiping, you do not need to remove the sticky substance. If using the conventional top coat, remove the sticky substance with an alcoholic lotion.

• Semilac Base Coat

  Polymerization times

  • UV / LED lamp 6W – 3 x 45 sec
  • UV / LED lamp 9W – 2 x 60 sec
  • UV / LED lamp 24W – 2 x 60 sec
  • UV / LED lamp 36W – 2 x 30 sec
  • UV / LED lamp 48 / 24W – 2 x 30 sec
  • UV lamp 36W – 120 sec

• Semilac Base

  Subtraction

  Step 1 : Remove the Top coat lightly from the nail surface with a file

  Step 2 : Soak a thin piece of cotton withNail Polish .

  Step 3 : Place it on the nail and wrap it with foil.

  Step 4 : Wait for 2 to 5 minutes.

  Step 5 : Remove the foil with a cotton swab and gently remove the varnish with a cutter.

• Semilac Therapeutic Base

  Components

  Di-HEMA Trimethylhex yl Dicarbamate, HEMA, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Hydroxycyclohexyl Phenyl Ketone, Trimethylbenzoyl Diphenylphosphine Oxide, Glycol HEMAMethacrylate, Phylocylate, Silica, Nylrathac, Bylon Methyl (N) , Aqua, BHT, Hydroquinone, p-Hydroxyanisole, CI 77891 (Titanium Dioxide), CI 77491 (Iron Oxides).