Polymer film wax Crystal on a synthetic base for sensitive skin. It has excellent plasticity and is designed for waxing both sensitive areas (face, bikini, armpits) and large surfaces (legs, arms). It applies with a great fit, when removed it is easily removed and does not break. The special wax attachments allow you to grab and remove hard and very short hairs from 1 mm. No fragrance.

• Melting point: + 38 °C
• Area of application: face, armpits, bikini
• Method of application: with a spatula
• Removal method: stripless
• Release form: granules in 750 / 100 g bags

• Rules for using ItalWax synthetic polymer wax

  Instructions for use

  1. Heat the wax in an electric heater to t + 38°C.
  2. Treat the epilation area with lotion containing alcohol.
  3. Apply a small amount of talcum powder.
  4. Apply a thin layer of wax with a spatula, regardless of the direction of hair growth, but towards you, leaving a small "petal" that you can then grab (we try to depilate the armpit with one application).
     CAUTION! Apply slowly, carefully pressing the spatula, exerting the necessary force.
  5. The wax will harden in 5-6 seconds (the wax, ready for removal, should not stick to your hand when you touch it).
  6. Having previously stretched the skin in the opposite direction from the tear, remove the wax with a sharp movement away from you, parallel to the skin. Repeat the process in the next section.
  7. After waxing, treat the skin with a soothing, cooling oil-free product: cooling cream/gel, white orchid emulsion.

Main mistakes when using film wax:

The wax stretches like candy and is difficult to remove.
Reason: the wax did not have time to harden.
Solution: dry the wax with talcum powder, wait 2-3 seconds and remove.

After removing the wax, hair remained.
Cause: the wax spatula was not pressed into the skin enough, so the hairs did not get into the wax layer.
Solution: Apply wax to the area of skin with the remaining hairs, pressing the spatula more firmly into the area of hair removal.

After removal, the wax along the edges of the application remains on the skin.
Cause: uneven wax application.
Solution: form an applique with the same layer in the middle and along the edges.