Professional Paraffin Device

The paraffin treatment of hands and feet is very important because it moisturizes, protects the skin from aging and freckles and gives a silky effect. It is very nice and important for a woman to have beautiful, soft and well-groomed hands.

Also, paraffin treatment is particularly suitable for problematic nails and skin, but it can also have a healthy benefit for the nails, because it maintains their flexibility and strengthens the skin surrounding them, which is a prerequisite for the health and durability of the fingers .

You can treat the elbow and knee areas in the same way if there is a dry skin problem.

• Paraffin Device: Characteristics

  The paraffin device has a modern design and is made of high quality materials. The LCD screen provides full control while performing the treatment.

  Dimensions:

  Height: 180 mm
  Width: 220 mm
  Length: 320 mm
  Technical data:

  Power: 300W
  Input voltage: 220/230V
  Output voltage: 220/230V
  Temperature range: 55-75 degrees Celsius.
  Capacity: 4500 ml
  Weight: about 1.5 kg

Instructions

• What you will need to do the Paraffin treatment

  you will need:

  • Paraffin device
  • Paraffin
  • Cotton gloves and boots

  Application instructions:

  1. Before placing them in the device make sure you have sprayed your hands and feet with antibacterial spray.
  2. It is good to do a manicure and pedicure first and at the point where the treatments are mentioned, do the paraffin instead of a mask.
  3. Turn on the device to get up to temperature, while inside you have put a whole piece of paraffin from the package. Let the paraffin melt.
  4. Be careful before placing your hands or feet inside, that it is not hot, but tolerable for the skin. Take off all your jewelry.
  5. Immerse the hand in the paraffin up to the height of the wrist or the foot up to the ankle. Repeat the process 3-4 times until an even, thick layer is formed.
  6. Wrap the area with cellophane and put the gloves on top.
  7. Apply the cotton glove well to the hand to keep the temperature constant. This "closure" creates a pleasant build-up of heat, forcing the pores to open. In this way, the substances we have placed are better introduced into the upper layers of the skin.
  8. After 15 minutes, remove the paraffin starting from the wrist or ankle with the help of cellophane. It goes away very easily. Apply a special protective cream.

• Adding paraffin to the device

  As you use the paraffin, you should renew it in the device. The paraffin should never be more than 50mm from the top of the device or above the "MAX WAX LEVEL" mark inside the device. Leave your device turned ON. Carefully add the required amount of paraffin. The paraffin, which you will add, will slowly start to melt. You can continue to do treatments while the additional paraffin melts.

• Cleaning the Paraffin Device

  You should clean the paraffin treatment device after every 25 paraffin treatments, or when you see that the paraffin is no longer clear and "scum" has accumulated at the bottom of the device. Old paraffin should never be reused. Plug the device in until the paraffin on the edges around the device softens and loosens. DO NOT REBEAT THE HARD PARAFFIN IN THE DEVICE OR USE METAL TOOLS TO SCRATCH THE CONTAINER. Press down on one edge of the paraffin and it will lift. Take the paraffin out of the container and throw it away. Unplug it.

  Wipe the inside of the device with a disposable towel to remove paraffin residue. Clean the inside and outside of the device with a general purpose cleaner. Then dry the device carefully. DO NOT SUBMERGE THE DEVICE IN WATER.

Read more on our Blog

About Paraffin Therapy